In version 1.2.0.3 (coming soon) we have added support for the excellent ShuttleXpress Jog Shuttle from Contour Design.
The shuttle has different functions depending on if the jog enable switch is activated or not. See picture below.
You can get the device from this Amazon link.
And here is a link to a downloadable settings file so you will get the correct key mappings.
ShuttleXpress settings for CNCSimulator Pro
In the software for the ShuttleXpress, import the file to get the correct key mappings.
There is also a model called Shuttle Pro.
It has more programmable buttons and removable keycaps for easy labeling. It can be used with the CNCSimulator Pro as well, but you will have to map the keys yourself as we do not have a settings file for it yet.
These are the current keys used in the CNCSimulator Pro (from ver 1.2.0.3).
Key name | Function | Comment |
CTRL+F1 | Jog Minus or Decrease Sim Speed | Depends on the Jog Enable Switch |
CTRL+F2 | Jog Plus or Increase Sim Speed | Depends on the Jog Enable Switch |
CTRL+F3 | Jog Mode STP or Start Simulation | Depends on the Jog Enable Switch |
CTRL+F4 | Jog Mode X or Pause Simulation | Depends on the Jog Enable Switch |
CTRL+F5 | Fast Forward | |
CTRL+F6 | Jog Mode Z or Fast Forw. Simulation | Depends on the Jog Enable Switch |
CTRL+F7 | Jog Mode Tool or Step Simulation | Depends on the Jog Enable Switch |
CTRL+F8 | Jog Mode Y or Stop Simulation | Depends on the Jog Enable Switch |
Arrow right | Pan Right | 3D view only |
Arrow left | Pan Left | 3D view only |
Arrow up | Pan up | 3D view only |
Arrow down | Pan down | 3D view only |
Page up | Zoom out | 3D view only |
Page down | Zoom in | 3D view only |
Num keyb. center key | Reset view | 3D view only |
Plus key | Increase Sim speed | |
Minus key | Decrease Sim speed | |
Space | Toggle Fast Forward |